c notches - and front end ????'s

did you trim your rear bumpstops at all? i trimmed mine a good inch to inch and half and that help give me more clearance. i also just installed toxic drop shocks. so that helps with the bumps, and i dont feel the axle hitting inthe rear much anymore.

i completely removed the rear bumpstops !!!!

Flip the upper ball joints? I was just looking at this last night (because as soon as the spindles come in I'm going to flip the ball joints) and the lower ball joint looks easy to flip and put the spindle on the top of it, but the upper control arm has that lip around it. Do you just trim the lip, flip the joint and brace it? Any help would be great. thanks.And the 8 piece c -notch is the way to go or else you'll go the cheap way and then 2 weeks later you'll be saying....shit I sould have done it right the first time.

check it out ladies=)
layin 20's on stock arms

I could make ya some weld in notches if you want but u'd have to let me no if u want regular c notchs, triangles, or what, but i could build you whatever u need...

cool cause as of right now how i sit its my daily driver when im not drivin the 05 focus ( WIFES car ) but let me know then cause as soon as i get the new ball joints in cause mine all seem to have an overly excessive amount of play i wanna drive the truck and not listen to the axle SMACK the frame

We'll just let me no man i could even do the notch for ya if u'd bring it up for like a day or something i'd just need to no what kinda notch you want andwhen u'd wanna do it...

well seeing how it would take like less the 10 min to get to your house i need to know $$$$ so i can run it by the wife

she tends to be a tight ass when it comdes to my truck if you know what i mean you might even know her she gradjuated from milton

oh and if any one is intrested i have a 22 gallon RCI plastic fuel cell with an electric fuel pump im trying to get rid of