lay out on 16

Your lucky then because I had to remove some bed side supports in the back. It still rubbed in the back on the top of the fender. In the front it kept it from laying out.

i have 17's with 40 series lowpro's and i dont need to cut out my fenders yet... i'm gonna this winter because hopefully ill have 20's next year...

your rims may be wider than mine though, or a different offset. the only mod i had to do was roll the inner lip of the bed/fenders to keep the tires off it. i don't remember my offset at the moment, but it's not stock, my tires sit a lil farther out than usual, but not to the point that they wont tuck with the bed/fender lip rolled up. it's reeeal close, but it works.

i have an 86 cab plus that had 195/40s and they rubbed the front, i have the tires to prove it. thats no turning low either. the older body bseries trucks are not the same. you may thing your rims arent rubbing but i guarantee you if you look at your fenderwells there are rub marks.

if your referring to my mazda thats not true, i can lay the truck all the way out and turn like it was locked up no problem, no rubbing, no gashes or marks in the tires either. maybe a lil worn down spot from were it cambers but thats normal

205/40/16's

i laid my truck Z71s and feder well had to be cut out on 205/40