5 lug conversion

I was wondering if anyone here has done a 5 lug conversion, specifically a 5x114 lug patter. I really want to do this, but i have no idea how to or what to do. if anyone can tell me what parts to buy or what i should do please let me know. also if anyone has done this before and has pictures... please post them up if possible. thanks!

i have recently started a project with the final result being 5 on 4 1/2 lug pattern... but it's no simple swap. it involves cutting the whole front clip off at the firewall and using mustang spindles and rotors. so... i've heard you can use mid 80's yota spindles and hubs, and they might just fit in stock mazda ball joints.

just get ur stock hubs redrilled up front and get 5 lug conversion axles from no limit customs.

i used yota spindles up front.. new rearend in the back

what year Yota spindles did you use? off which truck? and which rearend did you use? a Conversion one?

Does no limit customs have a website I can order the axel from?

649 for front and rear +150 core for the axles.

i used 84 toyota spindles abd ball joints...someone said you could use mazda balljoints with the toyota spind;es but i diddnt like the sound of that so i just drilled new holes in my c, arns and that hole in the upper arm i had to reem out a little,,,in the back i t got outahand,,,its a 91 rx-7 irs, lsd rearend...but you can use the rear outa a yota from any yota with a 22r motor like 81-93 i think

southernrazed...what is the bolt pattern on the rx7 rear?

So you used a 91 RX-7 Rear axel with LSD? does that just bolt in?