Flipping a arms?

here is a link to a set, thats who i got mine from.

Thanks for your feed back how much drop did u get with your spindles and were they hard to install mazdawg?

hahahah i see now they are 2 inch spindles here is some pics of my truck i got let me know what u guys think.

Yea, its a 2inch drop. I havent gotten the spindles yet, hopefully they will be here friday. But if they were like my s10 drop spindles it shouldnt be hard.

The drop spindles are easy to install the only part that you might find hard and that's if you don't have a grinder is the lower arm has a bump in it that you have to cut out so the new lower ball joint will fit. It faces up instead of down when I installed mineI found I got more a 2 3/4 drop and when I put the lower ball joint on top I got a 3 1/4 drop altogether.

mine went on just like stock. mine use factory ball joints. it's about 2.5 inches with flipped ball joints.

I have a set of AIM drop spindles that I'm not using if your interested let me no.

If you flip the upper arm over, you have to swap sides. What it does is angle the balljoint so it won't bind. If you have drop spindles you don't need to do this. If you dont, it will help lay on a bigger wheel, but you will loose lift because of the way the arm is shaped. It will hit the bracket at around 4 inches of lift. Its best to just pie cut your arm to the correct angle if it needs it.

solo93 how much for the spindles.

sounds good v8mazda4ever hopefully i can get them hey mazdawg let me know how they fit on the truck to make sure i wanna get it?