Whos got the lowest static drop?

anyone have 20s and a crazy low static drop

my 215/45/17s are same diameter as a 225/25/20 so it would look the same besides a bigger wheel

Torsion Bars removed, bumpstops shaved/removed, monoleaf'd with some block, 15" rims with stretched tires and 4x4 metal...

These pics were taken with no motor/trans in the truck, when the motor/trans are in it, its almost too low to drive... crossmember about 1/2" off the ground with no suspension travel.

why?

Good question! Why the hell is there a sail boat on that coke can?

my old isuzu


cranked torsions, 3" blocks on a mono leaf

With stock rims it was impossible to take speed humps straight on if at all
and the Mazda would be about the same if i got rid of the truck tyres on it, lol

Just got this B2200 a couple months ago. Was told its static dropt. Bottoms out even in my drive way. Plan on bagging it within the next year. Went ahead and put the fuel cell in it so I wouldn't blow up when it bottoms out.

heres mine this winter

before and after my new wheels.... not the lowest, but still lower than most static drops around here...

I had a slammed '91 s10 that had about an inch of travel and I got asked a few times if it was bagged and on a certain spot on the freeway the valance would tape the pavement and the suspension travel felt like a factory ride







Sorry I know its not a mazda but its slammed by means of 2'' drop spindles cut front coils and flipped leaf springs and 3'' blocks giving it a 6/7 drop, My mazda I recently got has cranked torsions and a 1'' blocks and the two middle leafs removed