who's got what for replacement bucket seats? and consoles

i got 3rd gen. integra seats, they didnt fit at all, i drill out the welds from the factory seats and bolted them back into place, then cut off the ones from the teg seats and then placed the seat into place on the factory mounts, tack welded them, then pulled it all out and apart and welded it all up and bolted back in

i know they dont match right now but they will be re-wrapped when its time to do the interior

I've got second gen 7 seats in mine, used the b series rails, bolted the front if the rails to the front holes if the 7 seats, had to drill one hole on 3 of the brackets to match up to the 7 seats bolt holes, and drill one hole in the seat pan on the passenger side and use a nut bolt combo. I tried at the junk yard with the 7 rails in an ext cab mazda and they didn't line up so I used the b series rails. Not sure if my seats are s4 or s5 tho... I'll get a picture of mine tomorrow