Sparky Mazda (Finished Pg. 31)

got a pair of ViAir 480s ordered, new starter, high-output alternator, and a pair of 1" spacers ordered. I'll try to get some pics up by the end of the week.

The way you did the body drop, were you still able to keep the stock heating equipment?????

that's a good question, i believe everything is still there, maybe Seth will care to chime in on this

Everything that was there, fit back into place no problems. Most of the AC was removed before I got it.

i figured the switch box is fubar'd, got one on order.

u think there is enough room for me to get the AC back in?

I don't know, I never saw any of it.


As far as the switch box, check all the ground again. And run the 12V power straight to the battery right behind the cab on the passenger side. And put an inline fuse in between the battery and the box. If you still blow fuses there is something wrong. But the switch box should be fine. Also it would still be under warranty.

my stock AC compressor hit my header, so if you have a header it might not work, otherwise it should all bolt up again, as long as there's room for the condensor(radiator lookin thing) to bolt back on your radiator you should be able to relocate everything fairly easily.

Cool, right on man, thanks for the heads up.

my truck won't respond to the switchbox. fuses fine. any ideas? thinking of upgrading valves, any suggestions?

is your power wire good? can you put a jumper wire straight from the battery to any valve?