Page 17 of 79
Mazda Projects \ "JUANITA bagged,bodied,22s s14 sr20det""JUANITA bagged,bodied,22s s14 sr20det"
views 117963
replies 783
following 102
skrapinsask
+1y
Project is looking rad!
What kind of bags are those up front?
I was looking to use denominator bags all the way around but i thought i would have to notch the front but i have seen its been done without notching. I see you had to notch your rear frame for the super lift, was this completely necessary? I'm not wanting to notch the front or rear frame rails if i can avoid it. What type of bag combination would you suggest for front and rear that would not need notching.
I've heard the denominator bags ride well and don't really want to loose ride quality by going with another bag.
GL with the build!
What kind of bags are those up front?
I was looking to use denominator bags all the way around but i thought i would have to notch the front but i have seen its been done without notching. I see you had to notch your rear frame for the super lift, was this completely necessary? I'm not wanting to notch the front or rear frame rails if i can avoid it. What type of bag combination would you suggest for front and rear that would not need notching.
I've heard the denominator bags ride well and don't really want to loose ride quality by going with another bag.
GL with the build!
trkluver
+1y
If you want to lay frame in the rear you will need to step notch the frame.
Yes they are the denominator or dominator whatever they are they are a bigger bag, and i didnt like the bag touching the frame when aired out up front , so i notched the frame to clear them. I believe you can use a RE6 without notching, but ask around here there is alot of guys that know more about the mazdawgs than i do.
If you want to lay frame in the rear you will need to step notch the frame.
Yes they are the denominator or dominator whatever they are they are a bigger bag, and i didnt like the bag touching the frame when aired out up front , so i notched the frame to clear them. I believe you can use a RE6 without notching, but ask around here there is alot of guys that know more about the mazdawgs than i do.
skrapinsask
+1y
I know the frame will need a step notch i'm just talking about notching the inner sides of the frame to clear for the diameter of the bag on the rear as well.
paparoach1983
+1y
no all you should do is move the bag inward so it clears then weld the bracket up so it has free roam you should not need to notch like that especially in the rear
no all you should do is move the bag inward so it clears then weld the bracket up so it has free roam you should not need to notch like that especially in the rear
skrapinsask
+1y
good to hear but from my research its almost completely necessary up front? unless your going with a different angle right?
good to hear but from my research its almost completely necessary up front? unless your going with a different angle right?
trkluver
+1y
you can change the angle on the bracket if your gonna run a smaller wheel and tire combo, but if your runnin something bigger you want your bag to compress evenly, so you need to match the angle of the lower bracket
hunterw
+1y
whooodie whooooo.....well got the sanden 508 converted finally to the grease edc. got it a tad mocked up too. and we got the fenders back on. my grille comes in tomorrow ill get thatinb and then its time to buy tires for my 18s and then all the small stuff. sucks cuz i ran out of budget money
