mazdalade b2200

hey cool im in a lil town called frostproof lm about a hour away from orlando and about a hour from tampa

heres some pics of my kit





the rear bag set-up im thinking this could work for the mazda trucks not sure exactly though the kit was for a chevy s10

ok did a lil work on my truck seen that sd.com has dimensions so went off that made my own notch got my bed pulled off got to looking with the notch put up the the side of the frame and looking at the frame under the cab and its like 4 inches off the ground and im wondering how much of a notch do i have to run to lay frame the measurements on my notch are 12 across the top 12 1/2 down the outter sides on the inside its 9inches and across the bottom is 21inches end to end now what would everyone recommend i will be doing a 4 link too also im thinking bag ontop axle heres some pics




ALSO WHAT DO I DO WITH THIS ROUND TUBING THAT GOES INSIDE FRAME RAIL TO FRAME RAIL AND HOLDS THE GAS TANK IN? i would like to keep the tank in the stock location

Almost layin frame still gotta cut out the inner fender wells tires are resting on it



80 psi


gotta reinforce some things but other than that its pretty much done!

Progress so far looks good. As for the gas tank issue I have kept just enough of the round tube to support the gas tank - the remainder was removed.

dang man cant believe i missed this one looking good so far bro

love the paint truck is looking good

thanks everyone for all the comments <img src="{SMILIES_PATH}/icon_biggrin.gif" alt=":D" title="Very Happy" /><!-- s:D -->

ok so the front of the truck is bagged and im loving it saving up money to get a four link and custom fuel cell and bag brackets will have pics up soon

QUESTION im running escalades with a 205/40/17 tire and when i drop the front its like a 1/2 inch from the cross-member my tires are rubbing the inner wheel wells what can i do to fix this ball joints are not flipped i dont wanna cut out my inner fenders any ideas or help would be appreciated

Smaller tire or your gonna have to cut man