Page 1 of 6
Mazda Projects \ Project "driveway built" Mazda gets a heart transplantProject "driveway built" Mazda gets a heart transplant
views 8930
replies 58
following 25
buildmagazine
+1y
Been working on this for the past couple years, after coming home from a show last year the stock motor started to knock so figured my not stuff a small block in her lol.. My name use to be Bick on here if this looks or sounds familar....
This is my Mazda before stripping her down
Stock as she comes blown mazda motor
Me and a friend pulled the motor and scrapped it for parts
Looks like theres alot of work ahead for me lol
Getting ready to cut the firewall and make room for the 305
The motor ill be using, out of a 80's cutlass.
Cut the old motor mounts out
Cleaning up the frame, welding all the factory holes smooth
More smoothing out
Now time for new motor mounts to hold the V8
In place on blocks doing alittle test fit
Hood still closes looks good here so now time to make the mounts
Start of the mounts, pretty basic and will do the job.
Now time to weld in the round tube for the bolts
Energy suspension motor mounts to help with vibration
Welding motor mounts now.
After welding is done ill cap the openings of the mounts
Alittle firewall mock up with plastic sheets that ill use as a template
Time for a new gas tank
Using a 90's blazer gas tank that will fit in here now
Frame ready for sand blasting and so on lol
Parts sandblasted ready for high build primmer
In high build ready for paint
Section of the firewall ready to be tacked into place
Starting the firewall fab
Rebuild the motor and sprayed the block to match the new body colour ill be going with
Got the suspension and frame painted and back together
Installed 4 link I fabricated and new tank installed
This is my Mazda before stripping her down
Stock as she comes blown mazda motor
Me and a friend pulled the motor and scrapped it for parts
Looks like theres alot of work ahead for me lol
Getting ready to cut the firewall and make room for the 305
The motor ill be using, out of a 80's cutlass.
Cut the old motor mounts out
Cleaning up the frame, welding all the factory holes smooth
More smoothing out
Now time for new motor mounts to hold the V8
In place on blocks doing alittle test fit
Hood still closes looks good here so now time to make the mounts
Start of the mounts, pretty basic and will do the job.
Now time to weld in the round tube for the bolts
Energy suspension motor mounts to help with vibration
Welding motor mounts now.
After welding is done ill cap the openings of the mounts
Alittle firewall mock up with plastic sheets that ill use as a template
Time for a new gas tank
Using a 90's blazer gas tank that will fit in here now
Frame ready for sand blasting and so on lol
Parts sandblasted ready for high build primmer
In high build ready for paint
Section of the firewall ready to be tacked into place
Starting the firewall fab
Rebuild the motor and sprayed the block to match the new body colour ill be going with
Got the suspension and frame painted and back together
Installed 4 link I fabricated and new tank installed
Post was last edited on Oct 08, 2011 12:10. This post has been edited 4
times.
scrpnmazda
+1y
Hey man nice to see the Mazda again. Well the frame. lol. Miss seeing you at shows around the NW.