Holley 5200.. ASAP PLEASE!!!!!!!!!!!!!

GOOD NEWS!

So go ahead and buy your 5200! The REDLINE adapter plate kit for the 32/36 DGV carb should fit for your 5200 to fit onto your intake manifold!

The guy I just called said that if anything it MAY be off by just a few mm's. Which really should'nt be a big deal depending on the holes, cause then you could drill them out bigger.

Now, the only problem using your holley 5200 is that the throttle is going to be whacked out. Instead of pulling the throttle with the cable when hooked up, you'll be pushing it, from what my guy told me.

So it'll fit, in short, but you will have some fab work to do! Good luck!

Fuck\ Maybe I shouldnt get it then, I want it to just bolt up with the adapter, Damn I really appreciate the help man, Saved me some money

Here is hotdawgs holley carb. In his garage it says its a 5210 though.

Notice how his throttle cable is. I dunno if the 5200 is anything alike but maybe it could help if you still wanna go through with it?

For a $100 0 MILE carb, you are getting a reaaally sweet deal! If I were you, I would try and make it work! You might spend maybe $60 for some fab stuff plus the $53 for the plates and your still spening less than buying a 32/36!

Hey and you know what? Maybe you might just be able to turn the carb 180 degrees and you would solve your throttle linkage problem?

Just some thoughts...

Heres a better deal for the adapter plates!

i have a 5200 that was on my 83 and it is totally different than what goes on the 86-93 models. unless they made a different style? but i don't think so. i can take a picture of it if you want man.

Hmmm...

SO maybe the Holley 5210 is what he needs then? Cause thats what 1hotdawg is running for his!