layin with beams

snoop, did you have to modify it? my tires are 225/40/18s and before I even let my truck all the way down I could see that there was gonna be a clearance problem so I just went ahead and took it out

a buddy of mine told me that we could cut part of it and glass it back together, so I would still have heat

The only thing I had to modify was the lower a/c line coming out of the condenser. I just had to bend it towards the motor a little bit. It's a tight fit, but it works. Yeah, I know my engine bay looks like shit!!

ahhhhhhhhh, your bags are mounted waaaaaaaay different than mine...mine are mounted on the radius arms, but my tire was gonna come in and hit the heater box where it plugs up at

215/35 18 is close to a 205/40 17 and mine layd HARD on them

mine lays on 235-45-17 and it hits but its not destroying it so itll be ok. it only hits laid out so im not to worried about it

did any of you have any problems with your steering arms hitting the frame? im sure you did. i know you can notch the frame, but what did you do on the drivers side about the steering box? is there possably a new steering arm you can buy, if so from who?