Ballin on a Budget!!! Help me build this Bad boy!

So I got this 1993 2200 Real cheap runs perfect, motor Has already been gone through so that part is done. I just got done doing a static drop by lowering torsion bars flipping front lower ball joints and taking out two leafs in the rear. The thing is thats not low enough for me! So far I have yet to spend $ on this build and want to keep it as cheap as possible with being able to daily drive it. CRAZY right I knowyou get what you pay for so I want to do as much as possible myself. I now have the bed off and I want to bag it but need to find some options, If anyone has some pictures of some inexpensive 4link or 3link setups please let me know. Also I would like to be able to keep the stock gas tank where it is "is that possible?" I will be updating this very often and would love all the assistance I can get! This should be a great project to build and I will use your ideas so lets get this rolling!!!! Thanks in advance! Its an extra cab. I will post pictures soon.

Yes you can keep your factory gas tank but you will need to run a 3 link and the only place that sells them already fabbed up for the mazdas is sadistic and they aren't cheap... get those pictures up and show us what you are working with

Heres a couple pictures i had to size them down for the tread. The truck is in great shape, even underneath.

Might just have to build a 4link for it If the 3link is so spendy. Also bag on bar or axle? not sure there either. Anyone got pictures of ones they built?

Look in the sponsors thread and you'll find Sadistic. Do search and you'll find pictures and build threads. If you can build a four link you shouldn't have a problem building a 3 link either.

make your own three link bro...this is mine , wasnt too bad to make .

I really like the build you did on your truck and it's the same kind of setup I want to do on mine. Can you post up some close up pics on your set up and how you fabd your bag brackets? I use my truck for work and to do stuff around the house but still want to do it in style thanks.

I like that3 link you got more pictures of how the rest is set up? I'm thinking that might be the way I'm going to do it.

here ya go guys easiest way , heres my build

" target="_blank

So for now my good friend bought me some 3inch blocks and we spend most the after noon putting them on. Had to cut the u bolts shorter because they came with huge ones and only have a dremel right now. I first tried mono leaf drove it around and it hit the frame so put back in the overload springs. Love the cardomain page baddawg, I want to build a three link like that one! I'am gonna check out the local metal yard for some steel tubing. I will post some pictures from flat ground tomorrow.