Ballin on a Budget!!! Help me build this Bad boy!

Yes, don't go without the overload. It risks breaking the single spring without.

And Baddawg's set up has always been a fav of many of us on here. You may wanna look up Mazdawg Mikey's build thread as well. He is 3 linked and has a z'd frame.

Heres some quik pictures from today I put the bed back on for now and painted the front grill and bumper. Rolled up on a couple locals today and couldn't help but notice I was about an inch lower then them. so I looked at there leafs and saw 2 blocks on top of each other "what the f" that dont look safe. I was still lower to whats up with that? I'm gonna flag him down next time I se him rolling and try to help him out .

These are the trucks I rolled up on. If you zoom you can see they didn't take out any leafs so I'm pretty sure thats why I'm lower even with there 3inch and 2inch blocks stacked on each other.

I would also consider a 3 link behind the axle with bag on lower link bars. You will get good lift. Great ride qualityand the pinion angle stays pretty darn good.I would just make sure your c notch is solid. Puts a lil more stress on it in the rear. The kit sadistic makes is extremely clean and of high quality.its less fabrication work then building your own and takes a lot of the guess work out of it. You get what you pay for. And sadistic gives great pricing on all the other air ride stuff you'll need. Sean is very knowledgable and a great guy

stacked blocks....way not safe...yes help a fool out befor he hurts someone or himself

Are saying a reverse three link? So after driving the truck around a bit I started to notice I was hitting the frame a bit. So today I did a small c notch to the factory frame like what baddawg253 has. It turned out pretty good got done to late to get pictures and had to get the bed on tonight because I daily drive it.

you could also flip ball joint up front.

heres my mazda specific 3 link built not bought for about 400 bones a little know how and pictures DONE DEAL stick a fork in it!! check out my build topic MAZDALADE B2200 on here i got alot of pics lmk if u need help if ur goin this way i drive my truck 72 miles to work and 72 home m-f to work no problems handles great i couldnt ask for a better ridin truck and considering this is my 1st bagged truck came out great!!! hit up my topic or pm me i can give ya my number if i can help out