tucnrims Project "Sweet Dreams" update " 2 link is installed

i wish they had a sarcasm emoticon......i was just joking ....i just been gone for a while and came back and tucin is still about to buy a 4 link.....i luv tucn.....and would help him out if we lived closer ....read 8 pages ago where i originally said bring it over lets fix it then again 4 pages ago and again two pages ago...(sarcasm..over exagerating)... granted there 400 miles betwen us...but comeon i wanna see his truck on the road ... not transforming in the same spot its been ...my only point was it could be, if that money was spent on what the truck needs... shit my truck sat for 3 years and two years seperately...i had other projects though...mini trucking isnt for dr phil type shit ... mini trucking is for rolling... comeone tucin lets see this thing get down on some asphalt...tucn aint leaving i knew that from pages agao when he told me that the first time... i would never tear into a brand new scener....i think i have given tucn a hard enough time he knows i m just pushing buttins gettin him to get mad and push commit to buy...."Grrrr i will so that j-cock asshat..." for reals tucin when i cut my current ourlink off i will send you my heimed link bars....there heims but im gonna switch to a bushing three link....if i still had a standard cab or the bed from it i would happily donate to his cause ....but all i got is ext cab beds....

being rich would be nice, but that snot the case. I was laid off from my job right before xmas and have been working this job for about 2 months. my wife is having health issues so been more focused on all of that. the truck will come along very soon, might be ordering my lower bars, bushings, tabs, this weekend and then working on getting them on next weekend. been thinking of going with a long panhard bar, i have ran em before and it worked great. at least for a while..

panhard bas have worked for years and still to this day are use d in new cars regularly.....it will be fine for what your doing....my wagon runs a panhard bar ....my wifes tahoe runs a pnahard bar its good ...its common place ...a

that works, i will get an unwelded panhard bar kit from suicidedoors and be set on that part. I can get the lower link bars, rod ends and tabs for cheap on rollpans.com. so hopefully within a few weeks I will be able to get to installing. as soon as i find a new bed I am going to do the bd. I will flare the bedsides out and be set.then start on shaving the lights and putting the caddies in.

Sounds good. Hope your wife is ok

If I were u I would see about trading those wheels for some that fit better... By the looks of it u will have to flair tbe shit outta ur bed to make em fit... Or just find a courier rear end or something like that... Depending on how much lift ur wanting out of ur rear suspension the panhard bar can cause a few issues... With your wheel ditment currently being so wide any side to to side movement on the axle will cause u to rub more ... That's the only downside of a panhard bar... But if ur not getting tons of lift it would be an issue... Imo I would do a trac bar... Lil easier to put on produces much less if any noticable side to side movement through articulation.. keep plugging away at it...

the wheels used to tuck without the fenders pulled out like they are currently. I seen the truck in a video and am not sure why someone pulled them out like they did. A shorter axle is an idea as well. I am setting my ride height at 5 inches off the ground, not to worried about getting big lift on the truck. the only rubbing the rear tires do is when the front is all the way up and the back all the way down so I should be ok on that part.

might look up the trac bar and see what it is about and things.

Pretty sure a track bar is the same as a panhard. Just a bar attached to the diff and frame to keep it centered, unless they have a top or bottom orientation but I doubt that.

Ordered my 2 link setup today. Should get it in 3-4 days. Mounting tabs are all on there so will be a bolt in swap. Panyard bar will be ordered in a week or 2.

been a month since posting last, got my 2 link today, took them a month to get it to me, last time i use rollpans.com. anyways I am going to try and work on the link tomorrow. I replaced the rear bags, u joint, carrier bearing a week ago. put a snugtop on it as well. Need to get new tires and should be able to get it out the driveway.






system is in, but will be getting redone in the future, doing a walk thru as soon as i get a new bed and an accordian boot.