my 93 DD(daily drifter)

well thanks i can try that i just dont want to break the window that im trying to get. and yea i have 4in blocks and i was lookin g at the belltech drop leafs they say its a 3in drop so i kinda figured i would need some sort of notch but im sure with some help i can get it done. i kinda like the c-notch that i saw on someones thread

well still wating for the snow to melt so here are some pics for ur enjoyment. let me know what you think
first is my RB20 240(second 240 i have owned)



this is my sr20 redtop it was in the first 240(build in progress somewhere between 400-450whp)


and a few pics of me sliding my first 240(this is with thr sr in it)

where'd u go harry's u pull it hazelton or pennsburg? I'm A pa resident (errr sorta been out the state more then i actually live in it now! ) if i were you i'd keep the orig bed and make a trailer out of it - or atleast as a spare if someone hits the truck . just a thought .


as to your window - to put it back in - put the rubber gasket around the window and take a small fabric like string ( tying string) wrap around the gasket and put the window in the frame while slowly removing the string as you press the window into the opening . .

no i went to johnnys u-pull it in altoona they have some really good prices but not many mazdas at all and yea i should keep the bed but i hate keeping stuff i know i probably wont use but that is a good reason to keep it but i wont be able to use it anyway cause my rims stick out past the bed. and thanks for the window info it should really help

so here is a small update(may be big) my buddies uncle has a junk yard out back of his house. there is a FB sitting there with a maybe running 12a. i can get the motor for free and if its a gls model then im grabing the LSD from it also. so does any know if the truck tranny with a T2 bell housing will fit the 12a? or do i need to use a differ trans

I know that the na fc trans will work perfectly if you swap the tail housing and shifter fingers from the truck's trans to the rx7 transmission. It will bolt right in, using the truck's trans mount and drive shaft. I have heard that the FB and fc transmissions are interchangeable, but I'm not sure about it.