threads
Page 3 of 7
Mazda Projects \  90 Mazda B22 "deepsleep"

90 Mazda B22 "deepsleep"

Mazda Projects
views 13195
replies 65
following 10
 
orangemazdab2000   +1y
How much are you asking for your old grill? Does it have any cracks?
chaserjohndoe   +1y
30 bucks shipped and its perfect besides the faded paint. no emblem in it was an ebay unit.
mymmeryloss   +1y
Thats a good deal
chaserjohndoe   +1y
I am wanting to put a topper on this would a topper from a 89-95.5 toyota pickup fit decent?
sincitylocal   +1y
The 86-93 Mazda short bed is 76" long and 60" wide.
The 84-95 Toyota regular cab short bed is 76-1/4" long and 60" wide.

Are you okay with an extra 1/4"?
chaserjohndoe   +1y
1/4 ain't that big a deal. if anything I could push it closer to the cab.
chaserjohndoe   +1y
Hey guys looking at getting some 4x4 fender flares.Would they fit on 2wd sheet metal?
sincitylocal   +1y
Not without heavy modification.
chaserjohndoe   +1y
thread post photo

thread post photo




woooooooooooooooooooooooooo Up and running. It turns out the icm inside the distributor was bad. Switched out the dizzy with a mechanical advance one and now it puuuuuuurrrrrrrsss.


Now that it runs I lowered the back 2 inches. Installed a snap type tonneau cover. It was a pain in the butt because of my bed liner.

I am going to lower the front in the morning, and put my 2wd grill in. Then maybe do the Ranger light swap. I have all the parts just a matter of getting off of my lazy butt and doing it. Then maybe wash it. It's a dirty girl.
chaserjohndoe   +1y
thread post photo

thread post photo

2" blocks in the back. lowered torsions 1" in the front. 3.5" fender to tire gap all the way around. Would go lower but I'm not tucking right now. 2wd grill on and looking spiffy. Once I cleaned it I found some surface rust, but that can wait for another day.

thread post photo

looks tiny compared to my 4x4 Toyota

thread post photo

My new to me bed cover and MazdaBScene.com sticker