90 Mazda B22 "deepsleep"

Comin along nicely

" target="_blank" target="_blank" target="_blank

Will this wheel fit or is the offset wrong?

derpy derp

Sold the car. reused the rubber from the factory wheels. I put some junk steel wheels and rubber on it. The buyer just wanted it for the body and interior.



195/60r14 front and 235/60r14 rear 26.5 height so doesn't mess with speedo. then painted the wheels after, doh hence the silver paint on part of the tire. Also spray bombed the entire truck flat black.



Then bought me a 92 Toyota 2wd standard cab that is 100% rust free for 500 smackers(no engine, trans, or drive shaft). It had a Chevy 350/350 combo in it. Got it for body panels for my 4x4 but also thinking about doing the front spindle and rear axle switch so I can run5 lugs. yeah I know none of the tires match





What's everyone's opinions is it worth doing the conversion?

Most people do the 5 lug swap because there are most choices of wheels in that bolt pattern

I know that, but as it sits now both my trucks are six lug. and if it's worth it to put the Toy axle under the Mazda(stronger and gear ratio?). That and I have 5 sets of wheels and 4 sets of tires between the 2 now.

I'm setting the Mazda up for autocross on the cheap so I don't know which way will be? When I can share wheels between them. When I build my trailer I want it to also use whatever wheels I have the most of.







.
.
.
.
.
.
.
.
.

Ok. I think I talked myself into keeping 6 lug

I say go with the 5 lug for better wheel and tire setups for autocross...

I think I won't do it. I'll stick with my 6 lug for now for simplicity. That and I know what factory 6lugs fit perfect.

Got me some Nissan Truck/Pathfinder aluminum wheels.(the futuristic looking ones) By my research they should tuck perfect. Now my problem is now. Do I want black walls or white letters from the tires I had mounted on it before. (215/60r15 front,235/60r15 rear, Cooper cobra's)

I am putting the wheels that where on the Mazda on the Toyota with 31x10.5r15's.
So lots of tire swapping
My mechanic is gonna love me.

Also the sawblade wheels that I have on my Toyota will be for sale soon if anyone is interested.

How hard is it to graft on this Amigo console to our radio console. The console separates behind the shifter trim I was thinking of just running that but thought it would be cool to run the whole thing. it even comes with the e-brake handle so I can convert to a floor handle at the same time.

This would be my first time messing with fiberglass or other methods of interior "stuff" so let me know your thoughts, and how you did it or what not.