1993 b2200 Clutch Help!

So I checked out my slave and master cylinders, can't see a leak and my reservoir is full.
my stepdad and I were talking about the possibility of it being the clutch valve?

my clutch isnt slipping or anything, it's got to be something in the hydraulics. what do you guys think?

OK, so I had a look with a friend of mine, and we're going to bleed the clutch this week and if it doesn't help we're going to change the master cylinder. and god forbid if that doesn't help, we're going to have to look inside the clutch housing

It's more than likely hydraulic.. you can inspect the clutch action thru the rubber plug in the side of the bellhousing,.. if you changed the clutch slave then the master just make sure its bled very very well...

bleeding tomorrow. I agree that it HAS to be hydraulic, if it was something with the clutch assembly, it would slip, right? And there's no noise or anything. Did what you suggested and checked inside the bell housing. nothing spectacular; no oil, good sign. no abnormal wear as far as I could see, my money is on it being a master cylinder issue.

So i'm going to bleed the lines and replace the master cylinder tomorrow, i'll post if it fixes the problem or not. Thanks for all the help! any additional tips are appreciated!!

Check the operation of the clutch release lever on the transmission for moving as it should when someone presses down and/or holds the clutch pedal down.

got it. changed the master cylinder and bled the lines. She works great now :) thanks for your help guys!!

Good !!! And your truck looks real nice !!!

thanks :D