Last wheel question I post i swear haha.

I love those wheels. I almost bought them myself. Only thing that turned me off was that they're non directional.

if your truck is black, id go with the chrome. plus its easy to keep clean, everything just wipes off them.

Black wheels scratch easier.

i know this was supposed to be the last wheel question so I wont start a new thread, but i've never gotten a straight answer on this so here goes. I have a 92 obviously, and have been told that for a 18x8, a +40mm offset is the lowest that will tuck. but the wheels im looking at have a +38mm offset, will it make that much of a difference if I'm just laying frame with no body drop? its only 2mm.

sorry, i didn't mean to hijack your thread.

i think that the 38 offset is the 'max' on what offset you can go..if you go on anything higher like a 35offet, your wheel will stick out..

as far as the 18x8 w/ the 40 offset i believe thats the setup of my old 18s heres the link that should have the pics on there for you to look at and get an idea, but i dnt think it would tuck b/c of the 8" wide rim..my front look like it came even w/ the fender, of course i have 2wd fenders, im pretty sure that if i had 4wd fenders, it woulda tucked..

heres the link for when it was for sale

thats the link

they would have tucked in the back barely due to having the jap bed, but the front wouldnt have tucked w/ my 2wd fenders...FYI..im sure on the 92 the fenders are flared more anyway so i dnt think it would matter

I have 18's on my truck 40mm offset I belive came off a Maxima and the only problem I have is when I turn all the way to the left the right wheel the weight hits the strut rod,wich is not a problem when my Can-Do arms come in and Am going to run a 215-35 wich is the same height as a 205-40-17 so I should be able to lay out

the wheels i bought came off of a maxima too..

he 3tc what size tires do you have on now, and you still have the 2wd fenders right

right now I have 225/40/18 on 2wd fenders no torsion bars and no bump stops, and something like almost 4 degrees of Neg Camber I forget I ddint print the alignment out whne I did it last

id like to see pics of this plz

i wana see how mine would look w/ the 18s