K
Single longest post in the world.
phatboislim
+1y
okie dokie..ill just add that to the list of front end parts, thanks
twisted minis
+1y
Damn, thats awesome! You've been through a lot with that truck. I'm even more jealous of the truck now. Especially your engine, and the engine bay. Damn.. Lol.
You still rocking the stock tranny crossmember?
You still rocking the stock tranny crossmember?
twisted minis
+1y
I'm also jealous of your luck on eBay.
3in2out
+1y
Truck came out great man!
toyotaman89
+1y
Hels yeah!! still rockin the stock tranny x-member.... stock spindles too!! oldschool!!
wouldnt mind gettin the trans clearanced outta the way tho...
wouldnt mind gettin the trans clearanced outta the way tho...
lotoy86
+1y
what type of bed cover was that on the jap bed cuase i cant find one.
kdcgrohl
+1y
beautiful. love the bed on regcab 4x fendered trucks. very clean. that style just doesnt look its age...
oldsklminitrk
+1y
Ok Out of curisoity where did ya get the tonneua cover for that jap bed?.....I have been looking for a while for one......BTW shit looks sweet man.....
lotoy86
+1y
rodney where have you been and btw i asked first so if hes tell i get first grab at it. lol
toyotaman89
+1y
well guys... believe it or not, that is (was) a regular EXTANG tonneau cover that was a hand-me-down... You can still buy it!! (it is the regular standard extang cover for a 89-95 toyota pickup. My roomate had a 90 and got a new one, so i put it on and whaddya know! It Fit perfectly!
Now Heres the red tape (pun intended)
The jap bed has no way of letting the clamps hold down the tonneau frame, casue theres no inside lip on the jap bed!! ---------------SO-----------
go to any automotive paint shop, and get 3M body molding tape, it has a red backing,(hence the pun) and you can get it in 1/2" and 1" wide rolls... run the tape down each bedrail, and the front bed rail.peel off the backing about 2 inches on each end and flip the backing out of the way so you can set the bedcover on top of the rails, it will now be "tacked" down, pull it up and reposition it if nessacery, once it is perflectly centered- push down HARD on your corners "tacks" to hold it in place while you pull the red backing off thru the side.
this WILL hold it on, god have mercy on your soul if ya ever wanna get it off though.
Id still have my old one to give someone, but when i was hit it ripped free about 1/2 the tape and Hurricane Katrina tore off the rest- last i saw the bed cover, it was floating in pensacola bay...lol
Now Heres the red tape (pun intended)
The jap bed has no way of letting the clamps hold down the tonneau frame, casue theres no inside lip on the jap bed!! ---------------SO-----------
go to any automotive paint shop, and get 3M body molding tape, it has a red backing,(hence the pun) and you can get it in 1/2" and 1" wide rolls... run the tape down each bedrail, and the front bed rail.peel off the backing about 2 inches on each end and flip the backing out of the way so you can set the bedcover on top of the rails, it will now be "tacked" down, pull it up and reposition it if nessacery, once it is perflectly centered- push down HARD on your corners "tacks" to hold it in place while you pull the red backing off thru the side.
this WILL hold it on, god have mercy on your soul if ya ever wanna get it off though.
Id still have my old one to give someone, but when i was hit it ripped free about 1/2 the tape and Hurricane Katrina tore off the rest- last i saw the bed cover, it was floating in pensacola bay...lol