static

What size wheels you running?
You have any pics?
What you mean dropped springs?
Thanks

18''X225/40 ://minitruckzone.tenmagazines.com/gallery/RestNot/87794-thmb.
The dropped springs are from Aim, used 2'' w/ 2'' blocks.

Looks like it tucks the 18's on a static thats hot.
It rides good?
Pics are really small hard to see.
Email me some better ones.

Thanks

://minitruckzone.tenmagazines.com/gallery/RestNot/87794.
This any better

Yes alot better
Thanks alot.
Did you have to flip your ball joints?
Is the back higher than the front?

No on the ball joints, have Belltech 2'' dropped spindels. If your going to bag your truck you should ,or will have to have them.That's next on mine. And the front & rear are the same height (sits level),the bottom of the wheel opening is higher in the front( look at the bottom primer).

In these photo's the rear is a little higher, sits level now,so rear wheels tuck a little more.

Ok cool
I got belltech spindles already with 3in blocks in the back.
I ordered a set of belltech 3in leafs.
Should I use the 3in blocks I got now or will that be too much?
What I need to do to the front to get it to match the back?
Lossen the torrisions?

Sounds like you'll have a 6'' drop at rear. Yes you'll need to adjust the torrision bars to get it to sit level. If that's the look you want! I've got 5'' at the rear,where it sit's now rides real good , so that will be the ride height when bagged. But have to go slow over speed bumps & in & out of driveways!
Can't wait to bag it. Not for speed ,hopping or draging. Just to drop at shows,& raise where needed! Planing on a 6-link set up w/ tubualer a-arms, & & shock waves in front & bags in rear,w/ forward tri 4-link. Expensive, handing & ride is my goal!
Build to handle & perform,as well as look good!!!!

OK thanks for all the help.
Im gonna order some 2in blocks then, to go with the new leafs.
I guess I should put the back all together first then crack the torrisions till it sits level right?
All I need to do is loosen the two bolts under the tranny right?
Thanks again