Rear set-up

i am running the suicide doors 8 inch bridge with the bags mounted over the axle. i am running a triangulated four link but it is a mix of reverse and forward. it is a cando reverse 4 link that we just ran the upper bars reverse and the lower bars forward. my tank is in my bed for now until i get a fuel cell. there are no shocks in the pic but i now have them mounted vertical using the tabs on the bridge bar that came with the kit and the lower mount was built into the four link bracket. hope this helps.

if you look in the pic you can see the holes(kinda) in the four link mounts. the links came with sleeves that we welded in. i also had another rear layin around so we took the brake valve out and used the tee from the other rear in it's place.