threads
Page 2 of 3
Air Ride Suspensions \  Hydro Help

Hydro Help

Air Ride Suspensions Q & A
views 709
replies 22
following 17
 
Chevy Guy   +1y
ok, ill call tommorow. Anyone know of anyone selling a setup used? or any shops in the fresno area that deal with hydros?
Chevy Guy   +1y
damn, your good, before I could even post. Thanks alot, imma check them out.
i_love_primer   +1y
seriously bro they have good shit, its not the brand its the install n the parts remember maintinance is always a plus also, and motors and batteries are the way to get faster lift, u can slow the dump by the slow down valves. also if theres a scrahder valve on the block u can add some air n get psi in the block inorder to lift a bit faster
Ih8bmps   +1y
all you need is 2 pumps, 4 dumps,and do springs and accumulators and it will ride.You don't need 4 pumps unless your looking to do some crazy hopping and standing three wheel.Then you go two for the front together and two in the rear each wheel.I use cce pump set ups and use prohopper cyl.'s cause there better and they use three seals.Hydro's are alot more money then bags if the set up don't kill you the battery's will,lol.
i_love_primer   +1y
by the way im juicing my mazda n ive had both showtime n pro hopper just dont get reverse flow cylinders EVER they are junk try n get triple seals if possible
Ih8bmps   +1y
Man if you need anything halla at me.i've done single pump with 4 dumps so you get the same as you would 2 pumps and thats everything,individual wheels(corners)side to side,three wheel,ect ect.it wont be as fast but it can be done.call brian @ cool cars.
Ih8bmps   +1y
Originally posted by i_love_primer



by the way im juicing my mazda n ive had both showtime n pro hopper just dont get reverse flow cylinders EVER they are junk try n get triple seals if possible

you should only use them for euro,import front wheel drive style,installs.reverse flow don't work well in traditional set ups.
Chevy Guy   +1y
Im installing them on a 61 lincoln. if that helps any. I really appreciate all the help you guys are giving and thanks for not turning this into a "juice sucks gets bags" thread.
i_love_primer   +1y
Originally posted by ih8bumps



Originally posted by i_love_primer



by the way im juicing my mazda n ive had both showtime n pro hopper just dont get reverse flow cylinders EVER they are junk try n get triple seals if possible

you should only use them for euro,import front wheel drive style,installs.reverse flow don't work well in traditional set ups.

well i already knew they dont work good on traditional but i had them on a honda civic and a dodge caravan n i bent 2 cylinders with out hopping it i blew seals weekly n was told they were great cylinders n yes they were brand new when installed thats the reason i reccomend tripple seals id rather fuck with installing a tripple seal upside down on a strut car n running the hoses before i EVER EVER EVER use a reverse flow again
Ih8bmps   +1y
juice rocks.i know alot of guys say bags bags bags but i've had them both and drove them both and you can't drive all day laid out a 1/4 off the ground with bags like you can juice.its just juice = $$$