front a arms on my s-10

or can you take some and email them to me i would apreciat it

if you need some stock lower and upper S-10 arms come see me in Rockwall I have several sets of lowers. they have not had anything done to them.

if you just cut your lower arms and make the top flat would that give enough room to lay in the front?? right now im still up maybe and inch or more in the front because my frame hits on the arms

first off modifyin your control arms are fine if you plate them back in. the stock arms are very strong. second you havent stated what size wheel/tire combo you have-or what your tryin to accomplish. with a 2 inch spindle and a 2 inch lowering coil, i have never had to modify the frame or the cojtrol arm. so i think you need to back up for a second and try to figure out what your doing. slammin your truck a half inch off the ground is cool, but if you cant get it back up to drive, then your a retard. if your old square sdime is 10 colors, stock wheels and tires, and now slammed,you should rethink your mini approach, because your prolly now a cop magnet. you want pics of peoples front ends, just look up s10s on the find owner profiles section and look at hundreds of them. last thing what the hell is ENEY? i think the word yoru tryin to spell is ANY.

go get new springs, thats rediculous to be taht low unadjustable. call me unhardcore, but oh well.

just how much did you chop of your coils?!

found this just for you

sorry so big... my bad

I only took off three forths of a coil on my old 70 model an its plenty low and still rides decent! Thats my 2 cents worth