Just got my 19"s

The colors on the truck look great.I also like the wheels.I just wish I could decide on what I want to run on mine.

Originally posted by doordraggintaco



you need to pop the spindle caps off and put the centers on the wheels

fubar information. Don't do that.

Originally posted by 555



Originally posted by doordraggintaco



you need to pop the spindle caps off and put the centers on the wheels

fubar information. Don't do that.

pop them off

please dont be ghetto and take your dust caps off your spindles, do u realize how much sand and dirt and shit can get in there and fuck up all your wheel bearings !!! best way to do it is take a bfh(big fuggin hammer) and pound the shit out of the dust caps til the wheels fit fine and the center caps fit, tahts what i had to do with my 18s, when i got my 19s, i had to get a 1/4" spacer for the wheels so they are spaced out and dont touch the dust cap and fit properly, toyotas have PLENTY of room to tuck even with a 1/4" spacer

^^^listen to kyle, he's got a badass yota!

i have 19 inch Axis Hagens on my bodydrop, i love those wheels, that damm center cap won't go on in the front, you'll need 1/8 inch spacers for the front for the caps to fit.................... they also rub my hopod when i drag

looks great bro !!!!!!!!!!

I have had the dust caps off mine for over 10 years and never had problems. If you want to, while the wheels are off, you can pop the wheel center caps in and run a bead of silicone around the inside perimeter of the backside of the wheel centers to make sure no dust and moisture gets in. Before you put the wheels back on, be liberal with the grease on the end of the spindle, etc. and put the wheels on. Periodically (rotating tires, etc.) you can regrease them while the wheels are off....no worries. Not really sure what is ghetto about that. I see a lot more "ghetto" things than that on most minitrucks.

Originally posted by XLEDDY



i have 19 inch Axis Hagens on my bodydrop, i love those wheels, that damm center cap won't go on in the front, you'll need 1/8 inch spacers for the front for the caps to fit.................... they also rub my hopod when i drag

looks great bro !!!!!!!!!!



Thanks bro So need 1/8 in Spacers on them and im good to go?

for the center caps, yeah .......

for the center caps, yeah .......