ramslam1998
+1y
Originally posted by bertad2p
smallest 24" tire is 295-35-24 nitto WRONG a 295/35/24 is 32.1 inches tall a Pirelli 315/30/24 is 31.6 inches tall
smallest 24" tire is 295-35-24 nitto WRONG a 295/35/24 is 32.1 inches tall a Pirelli 315/30/24 is 31.6 inches tall
SlammedAcroRam
+1y
I don't know what the backspacing is on my back rims but we took 1.5" off each side of the stock rearend. It only cost me 300 with all new bearings and everything. Should be much cheaper than going with a 9". That was considering I put in new gears and a posi but the 300 didn't include those parts.
mtm
+1y
Originally posted by SlammedAcroRam
I don't know what the backspacing is on my back rims but we took 1.5" off each side of the stock rearend. It only cost me 300 with all new bearings and everything. Should be much cheaper than going with a 9". That was considering I put in new gears and a posi but the 300 didn't include those parts.
i love your truck bro. And yes i love it so much i want to marry it
I don't know what the backspacing is on my back rims but we took 1.5" off each side of the stock rearend. It only cost me 300 with all new bearings and everything. Should be much cheaper than going with a 9". That was considering I put in new gears and a posi but the 300 didn't include those parts.
i love your truck bro. And yes i love it so much i want to marry it
Grenego
+1y
So I know it's not 24s but does anyone know what backspacing you need for 22s and if you can get some and not have to shorten your rear end?
rabounce
+1y
Originally posted by Grenego
So I know it's not 24s but does anyone know what backspacing you need for 22s and if you can get some and not have to shorten your rear end?
yea 9 inch wheel with 6 inches of backspacing will clean with a 265/35r22..
good luck with it they are pricey
i have a 9 with 5.5 and had to flair my bedsides the 1/2 inch to clear.. and i don't care for the look it gets either.. im definatly cuttin my rear end this year..
So I know it's not 24s but does anyone know what backspacing you need for 22s and if you can get some and not have to shorten your rear end?
yea 9 inch wheel with 6 inches of backspacing will clean with a 265/35r22..
good luck with it they are pricey
i have a 9 with 5.5 and had to flair my bedsides the 1/2 inch to clear.. and i don't care for the look it gets either.. im definatly cuttin my rear end this year..
jeff davy
+1y
Hey Well I have done two rams on 24's The Orange one And the silver one that someone has posted pics off aboue. You don't have to narrow your rear end. Measure your back spaceing and maybe flair the fenders a bit.
The orange dodge they machined down the pad for us and the silver one we just stretched. Why spend the money if you dont need to.
The orange dodge they machined down the pad for us and the silver one we just stretched. Why spend the money if you dont need to.
jeff davy
+1y
Hey Well I have done two rams on 24's The Orange one And the silver one that someone has posted pics off aboue. You don't have to narrow your rear end. Measure your back spaceing and maybe flair the fenders a bit.
The orange dodge they machined down the pad for us and the silver one we just stretched. Why spend the money if you dont need to.
The orange dodge they machined down the pad for us and the silver one we just stretched. Why spend the money if you dont need to.