Front Bag pics?

He will need to notch the frame where the control mounts a little only like 1/2 an inch No biggie..

but to lay alll rail it will need to be Z'd
I didnt flip the balljoint on the stock arm i raised it intially before replacing them arms with "flipped" chevy balljoints on these extensive arms.

to "Raise" the ball joint to the top of the control arm you will need to drill out the studs and replace with grade 8 bolts and file some of the control arm down and cap it and weld it in before you mount your ball joint on top of the spindle.

You may try to flip the balljoint in the exact some location by drilling out the studs flipping the balljoint upside down and using grade 8 bolts to mount it back in but i do not know how they will fit the spindle. (It will need to be reamed out from the bottom.) like i did mine for the ek arms..

Good luck

good, I have a balljoint reamer already. I think I might go this route.

let me get it apart, and see.