Serious Control Arms Question

THEY ARE STAMPED ALL 1-PIECE - NO SEAMS OR JOINTS SO THEY ARE PLENTY STRONG - OUR BALLJOINT PLATES ACTUALLY GO INSIDE THE TUBING ALONG WITH BEING NOTCHED FOR THE TUBING

Ok here is what I've dealt with in the past with S10 arms. I've only used the BYC and ART arms. I will probably never use the BYC arms again becuase of the tubing size that is used. It poses a problem with getting extra lift in the front when it is needed (bodydropped on 20s or 22s). The bigger tubing hits the frame when aired all the way up limiting the lift. However the ART arms are smaller and bent in a manner that allows much more travel up front, making it easier to clear bigger wheels. The SD arms look good from the pic, BUT the look as if the tubbing is even bigger than the BYC arm with will pose the same problems..Hope this helps, not putting anyone product as being bad, just some products work better than others. Thanks Jon Henson
DB Rods and Miniz
512-809-1854

yep with my ART arms and RS72s in the front of my truck(s10) I get mad lift, clear my 20s with ease. Never had any other arms from anyone else just giving my thats all.

I have art arms I love them got them a week after ordering them. They cost more than some others but I never hear any complaints about them.

Originally posted by PAINTGUYEKS



Those BYC ones dont look that strong to me. The tubes should be notched and the balljoint plate welded into the notches for strength like the KW and SD ones. Looks like those SD ones are gonna be beefy as he!! MS

the latest versions have notched plates and are welded all the way around. we also offer the S-10 arms in 1" tubing with a 1/4" wall for added clearance.

Originally posted by DawgsledMazda



Originally posted by PAINTGUYEKS



BADA$$ Mike always improving em which is a good thing........

Those BYC ones dont look that strong to me. The tubes should be notched and the balljoint plate welded into the notches for strength like the KW and SD ones. Looks like those SD ones are gonna be beefy as he!! MS

the latest versions have notched plates and are welded all the way around. we also offer the S-10 arms in 1" tubing with a 1/4" wall for added clearance.

THE ART ARMS R THE ONLY WAY TO GO

I would use the Suicide Doors.com arms, There beefy as fuck and the warrenty doesnt get any better. His shit is bad as hell. I wouldnt run anything else except MAYBE the ART arms. But the SD.com ones are the best IMO.

ART arms are the way to go.. Well worth the extra money and I had my arms in 3 days from SD.

Edited: 12/10/2005 4:40:02 PM by iLLblazer

Beyondsic Customs in Ontario Canada also offers s10 arms. The uppers are a 1 piece tubing design similar to ARTs. Havent seen the lowers yet. beyondsiccustoms@yahoo.ca