let me see your 2 links..

Originally posted by tenagator



and how do i figure out my pinion angle? this has me worried i dont knwo what to dlook for what to do. i guess i need a angle finder for the pinion? aand then i gota find it for driving height? but what bout if i wana drag and i go low will this matter? how do i go bout doin this best and safest



How To Set Pinion Angle

Read that very carefully, and it's actually pretty simple with a 1 piece driveshaft. Equal Opposite angles, and do it all at ride height.

im not runnin a panhard,but i do have a crossbrace that goes over the front of the differential

I got heims and i was plannin on building the panhard bar. I've built all of it so y stop now. I'm making my bars run from the outside of the frame and crook into the original mounting spot. i plan on mounting my bags right there close to where the frame starts to angle up. Will this be decent? How long should my panhard bar be?
Thanx everyone!

I personally wouldn't go with bags on the bars with a 2link. That's when you probably WILL have problems, more pinion change and all. If you settle for a 2-link you're gonna have restrictions (side to side, bad to have alot of travel). Keep it simple, take your time doing everything that matters so at least it works. I'd go with something like behind, or behing & under the axle brackets.

Think about it though, consider the work of a panhard and all, and you seem to want more lift.. you're almost doing the same amount of work as a 3-link.

I dont want lots of lift w/ the bags just a good ride. And i dont wanna move my tank. I have the 2 bars pretty much built already w/ the bushing ends from SD welded on one side. I have 2 heims and I figure that I could build a panhard w/ that. I will eventually change it later on down the road thinkin of goin irs later. I just have everything else to do the job and would like to get it done finally its been too long and drawn out so im ready to get it done. I only want f/b too so I figure this should work out decently.

Cool, well check out speedway, they have tapped bars.. probably even nice looking ones, for good prices to build that panhard. Post some pics.

Edited: 1/22/2006 9:44:24 PM by FloorVair

Originally posted by bdroppeddak



2links make people like boyd coddinton and herb adams cry.

2 links make U-joints wanna cry

Thanx Ricky. You've been some real help. At least someone's not hating on everything.

tax evasion makes boyd coddington cry

Originally posted by sadexcuse4s10



tax evasion makes boyd coddington cry

lmao..