spindles/arms

theres a 6" long tube, install it in place of the nut that normally goes on the main bolt thru the large bushing. the small bushing on the arms goes at the other end of that tube.

they basically bolt in the same as the stock ones, except no strut rods.

you can also weld the tube to the frame after you get it bolted up if you like.

ill get a set together bolted up and take a pic.

they will basically look like they are layed out on my site.



imagine the bushings on each end of the large tube and small tube. the one in the middle is threaded. one end replaces the stock nut on the stock frame.

hry everone mike finaly came through i got my lowers

you ordered yours like a couple weeks ago right? where the hell are mine then? Mike whats up? didnt get a tracking number. just seeing whats up

Yours are the old style Bryan, and I had to make the new jig for those. I already had the jig for the 88-93 and made a few sets I had sold and 2 extra sets.

yours are finally done... I had the crossbars for the uppers made and had to thread them. other than that they are done and all I have to do is box them up and ship them out.

MMR bought an Extra set of the 88-93 I had. I still have one set of those and one set of the 81-87 also.

Im also looking into using a screw in balljoint on the Isuzu lowers and maybe uppers too.

Im trying to get an Isuzu spindle to see what fits it. the Isuzu sets in the future will come with screw in balljoints.

does the 88-93 Isuzu lower balljoint point up or down?

lowers point up and uppers point down

I know the 81-87 lower balljoint ponts down, so it seems the best way to slam the 81-87 is to get the 88-93 spindles.

right on. im about to strip a 81-87 parts truck i have. if you want the front spindles and arms let me know. we can try to work someting out.

I just need one spindle to see what screw in balljoints might fit it.

hey kustomwerks, im about to start tearing my truck up to bag, do you need 2 see my control arms when i do?

give Eric a call tomorrow, he'll for sure work something out with ya. an on that one i would say yeah he is gonna need your stocks but trust me it'll be so worth it when you get the tubulars back!
(731)536-5252 (kustom werks #)