dakota ?

those wheels look like a deep dish, so they might not tuck with the factory parts.

dakotaondubs has BYC lowers and uppers, with stock spindals, he is running 20's. He also Z'd the frame 1 3/8" His lays flat out.

These are the wheels I have now. In 20x8.5 6 on 4.5 +14 mm offset.

I planned on getting aftermarket arms but wasn't sure if that's all I needed or there was something else I needed to lay it out with factory spindles.

those def wont tuck, look up d4k0t4 on here, i did his truck, and he had the same wheel specs. i built new arms 1 3/8" shorter.

was someone looking at my truck??
if the frame is z'ed you can lay out on 20's with stock arms and spindles, but you have to be z'ed like 3 inches! if you do it like mine, z'ed 1 3/16 to just lay out the front member you will need a set of arms. the byc arms are alright, took 2 1/2 months to get them. if you are going to buy arms and are not in a hurry talk to suicidedoors, they are makeing there own arms now. let me know if you have any questions or want some pics.

Hey James, didnt Silver Star build that truck? The previous owner told me he was having some problems with it after he got it back.

i heard the 1st owner had a freakin wheel fall off the truck!

that wasnt in the bed

yo if you get the djm 3 inche lowering conrol arms and a set of s10 cups from suicide doors you will lay on twenties good too you have to trim the frame tho for the tie rods