shaving without welding?????

I just Shaved the tailgate handle on an S-10 and took my time on the body work cus it is black.. and it turned out BEAUTIFUL and i tack welded it until it was solid and if you catch it just right and know where your lookin you can see a ghosh line where the handle was.. WTF causes this shit...?

Thats why i cut the lip around handle out and do flush plate of same thickness leave bout same thickness of metal gap around edge of filler for weld to fill tack till solid grind smooth then sandblast or wire wheel it to be sure all the gas residue is gone then skim with mar glass knock it down smooth then skim with 2 part glaze finish out then put couple coats of epoxy primer on let it dry sand with 180 then put 2 coats of urethane 2k primer on let dry block out with 320 wet then 600 wet and its ready to paint and never show a shadow

WELD IT! Ive had it shrink up even with duraglass over it. Dont waist your time!

fuck that panel bond. i had a shady shop in daytona called randy's autobody use that shit when i pulled my molding off and i payed to have it welded. well all 12 holes (6 a side) popped and you could see these lil square outlines

ive used 3 diff kinds of body glue...and not once had a problem or any noticable "holes"..the stuffs the shit, no warping...less body filer.hands down...