Bags or Cans

Sry ben you kinda lost me.. I know i need 1 fill and dump for each corner. so 4 fills and 4 dumps... To 3 wheel do i add 1 more fill to each back corner or 2??

Cans are only good for soup...

I know nothing about juice... How hard is it to setup?

Beer comes in cans

Originally posted by NRChopShop



Beer comes in cans

Fuck your right man,yeah beer too,soups over rated,lol...

u can go low with anything its all on how u do it. my accord was decently low for not havin much more done to it

i have juice and its the first adjustible suspention i have ever installed or even messed with. hell it was the first car/truck i ever rode in with adjustible suspention. mine rides so good,tons better then stock. i drive a 92 accord wagon. on a unibody i would never put it on air. the only thing i would put bags on is something i was goin to tow with. and dont listen about leaks, if you buy good stuff and install it right you will not have leaks. do not get rev flow cylinders if you go juice though, they do suck. my car is leak free and i drive at least 50 miles a day,highway and city. i love juice, you will to if you do it. you get a lot more lft to.

Originally posted by yotoman



Sry ben you kinda lost me.. I know i need 1 fill and dump for each corner. so 4 fills and 4 dumps... To 3 wheel do i add 1 more fill to each back corner or 2??

The cylinders are dual action. If you want to use them like a normal airbag, like in the front, you just put a fill and dump valve on one side of the cylinder. In the back, to get it to be able to dogleg, you have to put a fill and dump valve on each end of the cylinder. So that'd be 2 fill and 2 dump valves per cylinder in the back and 1 fill and 1 dump valve for each front cylinder.

--------------------------------------------------------------------------------
Originally posted by yotoman


Sry ben you kinda lost me.. I know i need 1 fill and dump for each corner. so 4 fills and 4 dumps... To 3 wheel do i add 1 more fill to each back corner or 2??



--------------------------------------------------------------------------------


The cylinders are dual action. If you want to use them like a normal airbag, like in the front, you just put a fill and dump valve on one side of the cylinder. In the back, to get it to be able to dogleg, you have to put a fill and dump valve on each end of the cylinder. So that'd be 2 fill and 2 dump valves per cylinder in the back and 1 fill and 1 dump valve for each front cylinder.
___________________________________
"getting grounded is a good thing"


O ok I got it... I think Im going to go with cans for this one.. Ive never done any adjustable suspension and I plan on my next ride being a mini... Any one got any hook ups on some good cans and what not?

If you plumb the cylinder to do a three wheel the car will ride like shit. When you put a valve on the side port of the cylinder it closes the flow of air in and out of the cylinder while you are driving. IF air cannot escape out of the
bottom of the cylinder then it will feel like you have steel rods for suspension. Think about it, you are basically riding on the cusion of the air in the cylinder.