How can I make my integra lay lower??(Please Help)

Edited: 6/14/2006 7:37:39 PM by BaggedTeg

My question is,what its the EASIESY way to make my car lay out lower? Dont get me wrong im not trying to take the esay way out i will do what it takes i just dont want to do it one way and it could have been easier... I have a 2000 acura integra with Truckin.com's Air cylinders 4" in the front 3" in the back with the BRACKETS the kit came with No MODs have been made to them........ PLEASE HELP WITH YOUR INFO....Thanx

shorten your spindles,remove all the fender welds,get the most you can out of the brackets(put them ass low as it goes,might have to do some grinding)i had to for the front

i see on the other thread that was made when it was first bagged,theres a pic of the front setup,that bracket theat goes into the lower arm,it had a small lip then a bigger one,take that small one off it will help a little bit,not much but ever lil bit counts

there are a few pics of how my civic is done in my profile...

just like i said on the other thread..the front cylinders are too big..they are gonna hit the control arms..that got my civic down a decent amount after i put in new cylinders and notched the towers

nice mud flaps dude!

mine dont hit,i just had to shave alittle off the spindles, and im running 4"..but if he wanted he could just swap cans front to back

If you juiced it and cut holes for your upper control arms you'd go a lot lower. Probably not your style though...

Originally posted by AON-4PumpedCL



If you juiced it and cut holes for your upper control arms you'd go a lot lower. Probably not your style though...

What he said.

switch to juice.