lowering engine

Edited: 7/26/2006 10:49:55 AM by ih8bumps

Originally posted by flipside01



Edited: 7/26/2006 1:28:28 AM by flipside01

thanks for the help everyone.i z'd the frame 1" aswell and want to lower my motor back down 1".i had a feeling i would have to section the oil pan, just wanted to double check.oww and yeah its right hand drive. sydney australia.. the land down under..

AHHH I didin't Z my frame,sorry for any miss infomation on my part....

Edited: 7/26/2006 10:58:43 AM by TiMe_1

I Z'ed my frame an inch and lowered the motor 3/4 of an inch. Any further and the steering WILL hit the pan. I also sectioned the back part of the pan 1/4 inch to keep it somewhat off the ground. It sit about 3/8-1/2 inch off the ground layed out.

Seth has some nice mounts he makes, but since i had the motor out, i cut the mounts off the FRAME and lowered those. Good Luck!

If you have any questions feel free to PM me.