AiredOut
+1y
Originally posted by TwistedMinis
Okay so I ran a smaller fuel line to the carb, and used the other port on the regulator to push excess fuel into the return line. It runs fine at idle but when I try to move it under a load it sputters. So I plugged that end off and just ran it straight to the carb, and it still sputters. I pulled the intake off to look again, and it still sprays a shitload of fuel, but I can see it cutting off and sputtering. I don't get it now..
Sounds like your float level is to high, or stuck needle seat could cause the problem.