Late model Ram front lower control arms

Bounce has 22x9 and by the look of this pic he didn't have to trim the fender. It does look flaired a little however. He has the EK arms with chevy balljoint flipped. He raised his uppers 3 inches. He is another guy who's had them flipped for a long time with no problems.

i was told that the arms with the GM balljoints are for 24's and the regular dodge balljoints are for 22s.

Jose, didn't you just buy a set of EK arms. Which set did you buy? Is you tie rod ends flipped? Killa, yall didn't flip the balljoint right, so did you flip the tie rod ends. If you did wouldn't that throw them out of line with the lower control arm, causing toe problems. If you didn't, I would think they would bind and the inners would bend. Just asking, not saying one way or the others right. Just interested in the setup.

Yea Jerry i bought some, i think they may still be sitting at ekstensive. but hopefully i will have the truck all together at Tex Mex.

Which ones did you buy. Is you tie rods flipped?

SVRDlurk, did yall raise the uppers on your truck. You have some killer camber, just wondering if yall raised them. Nice truck by the way, one of the sickest layed out dullies i've ever seen.

nothing was flipped, everything layed out. hes going to need new lowers because he drug through the bushing and the arm is bent from dragging. should be at tex-mex

my lowers are djm s im laying on a 32 inch tire

Central are your lowers flipped. You lay hard without alot of camber. Were the lowers modified at all?

Edited: 1/22/2007 12:22:49 PM by ///Bounce



Originally posted by thacru78



I know several other people who've put 50,000plus on the flipped balljoints without a problem.

Quoted for the truth!

Im over 40K easily maybe 50 i dunno.

Originally posted by thacru78

Bounce has 22x9 and by the look of this pic he didn't have to trim the fender. It does look flaired a little however. Actually it isn't flaired at all. Just the angle of the pic, But it does appear that way in the pic :)

At moment i have 305/40's in the front and tuck em with no problem still.