Project?......Got the small block in :) 8-4-07

Edited: 2/20/2007 8:16:50 AM by Chopped Mazda

OK, this is how pricing is going to break down for this new arm design.

The package will include:

2 - Tubular upper control arms, with Suicide Doors beefy machined X-Shafts, And greaseable Zerks on the shafts, and Daystar bushings. They will also include Two of the newly designed Uni-Joints, instead of bulky balljoint plates....

2 - Lower Control arms, Also with the new Uni-Joint, that is able to lay on a 22" wheel and tire combo.

Powdercoat of all 4 arms. mostly any color needed.

And will also include full assembly of the arms before shipment, so you can put them right on the truck.

Also the Uni-Joint that are used in these arms are not the standard similar purchasable ones that are available from some suspension shops. Each one of these have a in house machined main shaft, High Degree offset spaces, and press-in cups. Which are all machined in house to allow for extra suspeniosn travel without binding.

These Uni-joints also, WILL NOT require you to drill out your spindles to fit , like some designs require. These will accept the stock castle nuts for both top and bottom

Price for everything above will be 999$

Originally posted by Chopped Mazda



Edited: 2/20/2007 8:16:50 AM by Chopped Mazda

OK, this is how pricing is going to break down for this new arm design.

The package will include:

2 - Tubular upper control arms, with Suicide Doors beefy machined X-Shafts, And greaseable Zerks on the shafts, and Daystar bushings. They will also include Two of the newly designed Uni-Joints, instead of bulky balljoint plates....

2 - Lower Control arms, Also with the new Uni-Joint, that is able to lay on a 22" wheel and tire combo.

Powdercoat of all 4 arms. mostly any color needed.

And will also include full assembly of the arms before shipment, so you can put them right on the truck.

Also the Uni-Joint that are used in these arms are not the standard similar purchasable ones that are available from some suspension shops. Each one of these have a in house machined main shaft, High Degree offset spaces, and press-in cups. Which are all machined in house to allow for extra suspeniosn travel without binding.

These Uni-joints also, WILL NOT require you to drill out your spindles to fit , like some designs require. These will accept the stock castle nuts for both top and bottom

Price for everything above will be 999$



Is there a price break for raw steel?

LOL so you have like a C&C cutting machine and several plazma cutters just lay'n around the shop huh.. The work look great man.. Hope to see it some day.. what ideas do you have on painting the frame?

Originally posted by North East Kustoms



Originally posted by Chopped Mazda



Edited: 2/20/2007 8:16:50 AM by Chopped Mazda

OK, this is how pricing is going to break down for this new arm design.

The package will include:

2 - Tubular upper control arms, with Suicide Doors beefy machined X-Shafts, And greaseable Zerks on the shafts, and Daystar bushings. They will also include Two of the newly designed Uni-Joints, instead of bulky balljoint plates....

2 - Lower Control arms, Also with the new Uni-Joint, that is able to lay on a 22" wheel and tire combo.

Powdercoat of all 4 arms. mostly any color needed.

And will also include full assembly of the arms before shipment, so you can put them right on the truck.

Also the Uni-Joint that are used in these arms are not the standard similar purchasable ones that are available from some suspension shops. Each one of these have a in house machined main shaft, High Degree offset spaces, and press-in cups. Which are all machined in house to allow for extra suspeniosn travel without binding.

These Uni-joints also, WILL NOT require you to drill out your spindles to fit , like some designs require. These will accept the stock castle nuts for both top and bottom

Price for everything above will be 999$



Is there a price break for raw steel?

The raw steel ones are going to be up to riche, give him a call and see what hes willing to do with them

989-671-3729

Originally posted by Infinity Q92



LOL so you have like a C&C cutting machine and several plazma cutters just lay'n around the shop huh.. The work look great man.. Hope to see it some day.. what ideas do you have on painting the frame?

ummm, im not sure im following you correctly i guess.....oh, and its CNC not c&c maching. And no, i dont have a cnc lathe or mill, only manual ones....but i do have plasma cutters.

Taylor

i found my password lol, David we do offer shop discounts(wholesale pricing) and we will sell you unpowdercoated arms(call for your pricing).

watch for our add here on street source mag as soon as i get the banner back i am advertising on this site.
Thanks
Richie

got an update for everyone....

Ive latley been working on the floor of the cab, just bassicly getting the frame layd inside the cab, and bracing it up and squaring it up to the cab.

I plug welded some 1" angle to the sills of the door on the inside....and that gave me a good location to start the frame of my floor. 1" box tube makes that up. It dosent seem like alot was done here, but it was very damn time consuming for all thsi.

Also got my box sitting ware it shoudl around my rear section, and am getting ready to make mounts for all of that next weekend.

Im bassicly only getting the frame structured out on everything and all my mounts in place, then i will finish it all up when its off of my frame.

I also got my chrome back....

My control arms, link bars, cantilever brackets were all done in chrome. It turned out great! I know its early in the game for chrome, hell, i dont even have color yet, but i was anticipating a much much much longer wait time that what i auctually got....so, atleast i have it i guess......now i need my frame PC, and i can put it on.



Chrome!

WOW - Thats all i have to say.

Damn them uni-joints are sick. Can't wait to get mine. It's looking good man. i like the framework for the floor. I bet that took a while to do. All that measureing, cutting, notching, welding, and grinding. It will be worth it though. Looks good man keep up the good work.

Originally posted by TukinRange



WOW - Thats all i have to say.

What he said....There are just too many things to compliment!!!