bio max's spindles

I finally got both sides set up with the spindles and I have a good bit of neg camber, even aired up all the way I have a little. Max, is that normal?

bumpjust a little pic of my truck couple years back

i have a 01 taco and wanted to lower the front. can I use your 3" spindles with my stock spring and stock setup? I want to do this so that I dont have to buy stuff twice (a lowering kit then the the airbag setup)when I airbag it. when instahling a airbag setup for the front with these spindles what else is needed to complete the job? control arms? or what mods to the stock control arms?

nothing is needed dude..its 100% bolt on and everything is provided for you

I'm driving my 98 tacoma daily about 130-140 miles a day with Maxs spindles with no problems.

Sorry guys, now that I have my own section, I get a little cought up in it.

Yes, there will be a little too much camber, but unfortunately it is necessary. The upper body line causes some clearence issues, so I had to force the spindle to generate a little more than desired camber. It's one of those "one size fits all" problems that I just couldn't cure.

tjshaw00 Yes, you can just bolt on my spindles and bag it later.

what size are the uniballs on these arms

he said 7/8. 27 degree turning each way. 54 lock to lock.