quiet bags ??

ok, well i jsut got my mazda b22 the other day, and its got a weird set up for the ( buttons/switches part)

its got a gauge with some plastic hardlines comming off of it. two which come out and has a button on the end of the line ( one for the front to go up and one for the back to go up... and two more lines that comeoff of it and have a valve switch on them that is reallllllly hard to turn and its not the easiest thing to turn when your driving...sooo the question is how would i go about changing this all to 2 simple momentary switches up for up and down for donw one for front one for back obviously... and how woul di get the air noise to come out instead of it being silent when the truck goes up ... ( i have firestone bags if that helps...if you guys need to know anything else let me know ill tell ya...

find the valves and the exhast valve probably has a silencer commin out of it, take that out and it will be loud, and also...check sd.com and they have a valve plumbing diagram that way u can run f/b

are you talkin about man??

I wish a company would sell valves like the old school Herion valves that were loud ass hell when you hit it up or dumped it. Anyone know a valve company that still sells these? I have come GC 450s on my wagon and bought SMC 1/2" for my dually....but all they do is make a woooosh sound. I want some that bark real loud.

its kinda hard to explain what im trying to say...


that sd.com website goes straight to some mentor website...

ok lets see if i can explain this a little better.. my bags on my truck are silent they make zero noise what so ever. i want them to be like most truck and my friends trucks when you hit the switch it makes the loud ass SSSSSSSSSHHHHHHH noise.... friend said it sbecause my truck doesnt have valves... and how to make the truck go up and down is there is a button on a hardplastic line comming off a gauge in my truck that has a button on it you push and to make the truck go up ( REALLY SLOW ) and same with the back there is a seprate button ont he end of a hard plastic line... to make the truck go down there are two more hard plastic lines that come off the gauge, and have a brass knob on them when you push the knob down which is realllly hard to push down...tons and tons of air come out of it ( inside my truck ) doesnt smell or anything just loud like it shoul dbe outside the truck when you hit the swtich... what can i do to make those two buttons into momentary on/off/on switches and still be abel to make them work with my bags... ???

is that a little better

soundfs like you have manuel valves are the valves real slow too?

It sounds to me like you have manual valves. I could be wrong though because I am by no means an expert on this subject.

sounds like you have a push button manual setup. what you need i think are actual electric valves to do what your asking hope that helps. good luck bro

or maybe I am right...by the time I posted my first reply 2 other people had posted at the same time

yeah i used to have that same set up it was made by firestone i think it was 97 when i had that.worked great then though. but yeah your going to need some electric valves to get what you want.