73-87 c10 front end

i need to take some updated pics,but the blazer is out side and by the time i get to the shop its dark out side(yes it sucks but i have to work on other peoples stuff to pay the bills).
but all i did was chop off the end,monve it up 2 inches and reinforce it( an old trick from my lowridin days) that coupled with 3 inch spindles inabled me to only drop the body 3 inches and keep the factory floor

im just lookin to bag it and lay frame. no body drop here ever. or are you talking about "z" ing the frame?

thanks guys, answered everything i needed to know. and ill check out the other thread on the subjectg

Sence your on the subject of the dropmember. Whats the largest size rim and tire combo you can run before you have to cut the heater and a/c box out?

Originally posted by SITNLOWSITNFAT



Sence your on the subject of the dropmember. Whats the largest size rim and tire combo you can run before you have to cut the heater and a/c box out?

With a 27" tall tire (255 35 20) you can slide a piece of paper between the tire and blower motor with the truck LAYING FRAME. Anything taller and you'll need some mods.

Originally posted by Porterbuilt



Originally posted by SITNLOWSITNFAT



Sence your on the subject of the dropmember. Whats the largest size rim and tire combo you can run before you have to cut the heater and a/c box out?

With a 27" tall tire (255 35 20) you can slide a piece of paper between the tire and blower motor with the truck LAYING FRAME. Anything taller and you'll need some mods.

so with everything out of the way what size tires can you run and still lay frame?

I'm runnin 265/35/22z on the front of the burban. Frame is Z'd about 2.75 inches and its laid out. notched the firewall and 86d the blower. I'm gonna be runnin the underdash kit that allows you to use the factory A/C controls

You can lay frame with a 30" tall tire. You will need to run a 3" spindle and a firestone bag to accomplish this.