Cruz Lo
+1y
Edited: 2/5/2008 8:02:48 PM by Cruz Lo
Edited: 2/5/2008 7:52:58 PM by Cruz Lo
Originally posted by daburban
Can you go into more depth about the digital ride height sensors? Like what cables you got and whatever. I am interested in doing this.
I am traveling lately so I have no access to exactly what I bought. Not trying to hide anything!
I posted already what the part numbers were for the displays and encoders. And showed pics of the brackets, arms and linkage I made.
I figured it out after looking at the US digital site and calling them. There is no kit or anything. you will need......
The displays (one for each encoder)They come with a 110Volt to 12volt power adaptor. I just cut the tip off and hooked it up to the trucks power.
The encoders. I used one for the front and one the the rear. I bought the highest resolution with the index option.
The cables. (again one for each encoder.) The cables go between the encoders and the display.
You have to use differential style for eveything due to the length of cables needed (over 6 feet)
SEE the Encoders here I used the metal case (they are made from Billet!)
The display is programmable. You can read about the options.
Read about the Display HERE
Edited: 2/5/2008 7:52:58 PM by Cruz Lo
Originally posted by daburban
Can you go into more depth about the digital ride height sensors? Like what cables you got and whatever. I am interested in doing this.
I am traveling lately so I have no access to exactly what I bought. Not trying to hide anything!
I posted already what the part numbers were for the displays and encoders. And showed pics of the brackets, arms and linkage I made.
I figured it out after looking at the US digital site and calling them. There is no kit or anything. you will need......
The displays (one for each encoder)They come with a 110Volt to 12volt power adaptor. I just cut the tip off and hooked it up to the trucks power.
The encoders. I used one for the front and one the the rear. I bought the highest resolution with the index option.
The cables. (again one for each encoder.) The cables go between the encoders and the display.
You have to use differential style for eveything due to the length of cables needed (over 6 feet)
SEE the Encoders here I used the metal case (they are made from Billet!)
The display is programmable. You can read about the options.
Read about the Display HERE
Cruz Lo
+1y
Edited: 2/9/2008 7:59:32 AM by Cruz Lo
The tank is stainless. To my design.Built by Ricks Hot Rods. Speak to Hector 915-760-4388. He will remenber the tank and could probobly make another just like it.
Oh, and it holds about 26 Gal.
Actual size model
Test Fit
I sent them my sending unit since there can be differences in some models/Years.
WARNING!!!! Do not have your Sending Unit shipped back in the tank.
This is what happens!
But in the end it all worked out!
The tank is stainless. To my design.Built by Ricks Hot Rods. Speak to Hector 915-760-4388. He will remenber the tank and could probobly make another just like it.
Oh, and it holds about 26 Gal.
Actual size model
Test Fit
I sent them my sending unit since there can be differences in some models/Years.
WARNING!!!! Do not have your Sending Unit shipped back in the tank.
This is what happens!
But in the end it all worked out!
jacob22
+1y
hey preciate the info on the gas tank you got one of the nicest truck out cant wait to see it done
