I think it's time for a Weber.

^ Damn. The only thing that worries me about that one is the one piece adapter. Its taller than the two piece ones, which I know have been said to leak. Do you know how far that adapter puts the air cleaner above the valve cover?

I think I could make a 22R kit work, I just need a different throttle cable.

Do you know if those old 20R Offy intakes had the Weber bolt pattern? Since you've had 5 Webers, is it safe to assume you're pretty happy with it?

Originally posted by TwistedMinis



Originally posted by lucky_brew



http://www.theimportexperts.com/

$350? When I looked on eBay a year back they where $100 less. Damn, guess I should have bought one then.

damn! they went up...ALOT! last time i was on their site (about 2 or 3 months ago) they were 229.00 plus 12.00 shipping. that blows!

Another carb you can run would be a holley. Not sure of the part # but it would be the same carb that came on a 4cyl ford pinto. I used one years ago on a 22r and it worked out perfect. Just thought I would bring it up.

Holley 3200. Same as the Weber.

they make an adapter to run the holley on a 20r and 22r intake/head

Yeah its the same one they use for the Weber.

yes weber and holley 3200 are the same. some of the holleys have the throttle mount on the opposite side.

yes weber progressive is the only way to go on a 20 or 22r. the one piece and two piece adapters leak from the beginning. my fix has always go get the good cork roll gasket and cut your own gaskets. with cutting my own gaskets and using locktite on the fastners i havent had anymore problems.

cookie

im using a holly 500cfm on my 720 it runs very good

Originally posted by cookiemonster13



yes weber and holley 3200 are the same. some of the holleys have the throttle mount on the opposite side.

yes weber progressive is the only way to go on a 20 or 22r. the one piece and two piece adapters leak from the beginning. my fix has always go get the good cork roll gasket and cut your own gaskets. with cutting my own gaskets and using locktite on the fastners i havent had anymore problems.

cookie

Do you know how far the air cleaner ends up above the valve cover?

the progressive the same thing as the 32/36. if not, whats the diff