Page 7 of 18
Body work and Paint \ ****Project: "Bucket of Bolts"********Project: "Bucket of Bolts"****
views 4920
replies 171
following 59
kblazer
+1y
great job brian, didnt take long to get them bitches in. i thought you might need a day to recover after the shit that killed the dinosaurs...lol
bodydropped85
+1y
hell yea lookin good. i put 4 bear claws in a 49 chyrsler limo at work, what paint in the ass, had to build the plates for the stricker like you did to.
FLYINLO
+1y
Andrew....don't you know Tim could have done all that with a little cardboard and mud.........heheheheh
pootytang
+1y
damn, i missed this one! that thing is badazz, the rendering is tight! looks f'n sweet in primer even.
lost cause
+1y
Originally posted by 72bumpside
what happened to daily updates hurry up fool!
^^^^^ you fucker
Well the past couple of days I've just been digging into the passanger side door and door jamb.....
Here's what I'm work'n with......
The step floor on the passanger side was way worse than the driver's side, so this side got completly cut out and replaced with some 16gauge
tack tack tack
then I slowly weld in hot little beads inbetween the tacks......
and eventually it all gets welded in solid
While I had the welder out (and was in a metal-fab kinda mood) I went straight to the repairs on the passanger door................
what happened to daily updates hurry up fool!
^^^^^ you fucker
Well the past couple of days I've just been digging into the passanger side door and door jamb.....
Here's what I'm work'n with......
The step floor on the passanger side was way worse than the driver's side, so this side got completly cut out and replaced with some 16gauge
tack tack tack
then I slowly weld in hot little beads inbetween the tacks......
and eventually it all gets welded in solid
While I had the welder out (and was in a metal-fab kinda mood) I went straight to the repairs on the passanger door................
lost cause
+1y
Here's the sorry ass work done (previously) to this door......
^^^^And that all before I started digging into this nasty shit!
the lower corners were the worst.....
This is what it looked like under all the fuck'n bondo that was used to "fix" this problem
Needless to say I cut that shit out and welded in fresh wetal
And again, some fucked up ass repair work needed to be fixed on the other corner of the door (what a joke).....
Berfore I dug into the shit work^^^^^^
And after I removerd all the shit work
and again I cut out the crap metal.....
Made new filler peices and tacked em' in.....
all better,....ground down and ready for mud
What a bitch
"Lost Cause"
^^^^And that all before I started digging into this nasty shit!
the lower corners were the worst.....
This is what it looked like under all the fuck'n bondo that was used to "fix" this problem
Needless to say I cut that shit out and welded in fresh wetal
And again, some fucked up ass repair work needed to be fixed on the other corner of the door (what a joke).....
Berfore I dug into the shit work^^^^^^
And after I removerd all the shit work
and again I cut out the crap metal.....
Made new filler peices and tacked em' in.....
all better,....ground down and ready for mud
What a bitch
"Lost Cause"