threads
Page 1 of 3
Mazda Trucks \  Vibration in truck

Vibration in truck

Mazda Trucks Make Specific
views 614
replies 27
following 9
 
xcpointx   +1y
I've got a slight to moderate vibration throughout the cab.. It feels like it could be a loose engine or exhaust mounting but I haven't been able to find anything.

Any other ideas or points to check?
THE LOW RANGER   +1y
check your drive line and u joints i had the same thing happen to me could be you out of balance hope that helps
xcpointx   +1y
Edited: 12/23/2008 6:36:10 AM by xcpointx

Edited: 12/23/2008 6:35:27 AM by xcpointx

Thanks!Which joints do you mean?

The vibe is easily felt when I rev it in neutral.
jdm customs   +1y
in neutral and not moving? if so, check the motor mounts first.
doulovemins   +1y
could be warped rotors
xcpointx   +1y
Excuse my ignorance here, sorry. What are rotors? Im in south africa so maybe the terminology is different..

I took the truck to the shop yesterday and they guessed at the flywheel being out of balance. Does that sound possible?
Also would a vibration like this also be caused by the timing being out, like if the belt has skipped a tooth?
The vibration is most evident at a certain low rev around 2000. Everything starts shaking.
xcpointx   +1y
bump
fitbmx180   +1y
Edited: 12/29/2008 9:15:38 AM by fitbmx180

rotors are used on your brakes.. on a mazda.. it would be your front brakes.. it would be what the brake pads catchs on.... and on my one mazda.. it does the same when i reach about 90 km/h
xcpointx   +1y
Oh ok cool, thanks! Ive got this vibration at idle.

Ive checked the timing and it seems fine. However it looks like its HALF a tooth out when I check with a light? Is that possible? At rest crank and cam line up perfectly.
drgnaccordwgn   +1y
try mazdabscene.com and mazdatruckin.com , those ppl r great and willing to help....