wtf my 6 inch z problems help!!

no i get why he did the 6" z to put the 2wd lift spindles on it..to make a prerunner with a zed frame

I cant wait to see the dope hood scoop  your guna have to run with the engine being 6" higher  if you don't drop it, its gona be like something off a top fuel dragster... you were on the right track of asking for help its too bad you couldn't at least consider it.... like you said "your friends have chopped up trucks" sounds like their on the path to taking your truck as another victim  good luck hope you prove the MT Community wrong 

Edited: 4/7/2009 1:34:17 AM by dajizzsocal

You guys haven't caught the hidden message. 6'' z, lots of cuts into firewall, he wants to, and will be the first one to lay frame on 28's! :) That's the ONLY reason for a 6'' z. REALLY 

---------------------------------------------Originally posted by 1low68c10ok well to start things off i have 2.5 inch drop spindles so no i am not being cheap they are mccaughys and rather pricey secondly my truck was not layed out before i zed it i am being cheap and running oem control arms cuz i do not have 1000 for upper and lower control arms and thirdly i have all the steering completly in the truck 100% and it is not modified what so ever i just moved the hole in the firewall higher and i also have the brake booster issue cleared up and it is also in the truck sitting nice the firewall is almost done just some finishing up and all is well also the entire z is reinforced on the inside with some gussets and it was welded inside and out there is nothing wrong with the welds i think they are super sexy since about 30+people do not believe this will work i will personally see that my friends who are relativly smart and i finish my crazy stupid retarded and anyother bulls#@t words all yous got to say and personally drag it up and down the east coast for shows in the north east so if anyone is around the area come see my one and only 6inch z ---------------------------------------------WHYS ALL THIS BULL SHIT ON THE EAST COAST?  DAMN SOMETHING ELSE MAKE US LOOK BAD/////////////////////////////

This dude goes from asking for help to advertising work for $1250 (see other forum)? 

I think its more funny that he is trying to sell their service to others and they are both completely lost "just give us a day and 1250 and we will ruin your truck"

So thats how much I could charge to do one properly around here  I was really wondering about that, but not a 6" Z And I like how now the guy disappeared because he feels like a total douche, but he did figure out the steering, clutch, brakes, and everything else that was a problem in a day or so....

not sure what to say about this thread...people try to help and this is what they get..

Just read the C10 topic. Funny how most of the topic is giving the thumbs up on someone else's Z they posted in it. All the other comments to this douche are the same as he got here.

I like the topic on the other forum where he is telling everyone that there is no point in doing a 3" Z, because it won't lay out.