threads
Page 66 of 132
Mini Truckin General \  Michigan Metal Works ---- Updates : Please Read.

Michigan Metal Works ---- Updates : Please Read.

Mini Truckin General General Discussions
views 56285
replies 1319
following 232
 
jeebus @ mmw   +1y
Cool man, thats exactly like yours are, except a bit longer for your truck. That set there is for a S-10.

jeebus @ mmw   +1y
I almost forgot about these pics as well.

This first one is the parallel 4link brackets i send with my kits to mount on the frame side of the link. Full welded, ready to be placed on the frame.





And these are the final version of the new MMW V3 S-10 control arms. There will be a new set of V3 lowers to match as well, just had a few issues with the powder coat on them.

post photo
post photo
post photo
post photo
post photo
AftermathMike   +1y
very nice work!!
2001x   +1y
call me
jeebus @ mmw   +1y
Thanks mike!


eric, i called you last week damnit, but you never called me back lol.

you can email me too info@michiganmetalworks.com




Taylor
bodydropinc   +1y
i need them f150 arms!
jeebus @ mmw   +1y
:) Right now, i can have set of those out in about 2 weeks.

989-750-2689



Taylor
2001x   +1y
you need to get rid of the iphone...i saw no call from you haha

text me your paypal addy so i can get some money to ya
jeebus @ mmw   +1y
LOL


Ive been calling you from my shop line, its no iphone!

Ill shoot you a text when im done for the day in the shop.



Taylor
jeebus @ mmw   +1y
So, the other day i found the need to have a threaded bung that would fit inside a 1.5" OD .120 wall DOM tube. I searched and searched and found out that NOBODY sells one...

I then looked around more and found out that besides the bungs that are made for a 1" ID tube, there is not much else out there made for a 3/4-16 thread....

So, i came up with these. These are all 3/4-16 RH or LH threaded bungs for the following tube sizes:

1.250" OD x .120 Wall1.375" OD x .120 Wall1.500" OD x .120 Wall1.750" OD x .120 Wall1.500" OD x .250 Wall1.750" OD x .375 Wall

I make them from 1018 CR Solid, and make them with enough BEEF to them so that the absorb alot more heat and do not warp and fuck up the threads as often as the regular ones.

Any size 8.99 Each.

Discounts at 10+

Heres some pics of the ones i make, and the standard ones you find at any other place.





post photo
post photo
post photo
post photo