threads
Page 72 of 132
Mini Truckin General \  Michigan Metal Works ---- Updates : Please Read.

Michigan Metal Works ---- Updates : Please Read.

Mini Truckin General General Discussions
views 56279
replies 1319
following 232
 
jeebus @ mmw   +1y
ooooo

Ive also got some BIG updates for new Jeebus Joint styles coming soon. I sunk a little design time into a new style, and for some people it will be the only way to go!

It will be super duper bad ass!




Taylor
relaxednoma   +1y
good stuff taylor!
tuckinlugs06   +1y
could you make some oil caps for some sbc vavle covers ...like a lowprofile push in oil cap
tuckinlugs06   +1y
also i bought the plans for the tubing bender on ebay ...what would you charge to cut and mill the parts
jeebus @ mmw   +1y
off the top of my head i really have no idea how much you would have into it, im not even sure of the design you have, there all different.



Taylor
e10pvmt   +1y
Do the NBS chevy arms do anything about camber issues or narrowing the track width? Or are they just stock dimensional replacements built with more travel?
jeebus @ mmw   +1y
The arms are CNC made, so i can narrow or change anything about them with a few buttons being pressed, so i can tailor them to you exact needs, and i do it at no extra charge. I build them to your specs. If you want them narrowed a certain amount, its no problem, need the lowers shortened more than the lowers, to adjust some camber issues... no problem.

the ones pictured are narrowed .500 on each side, and i sent him raised uca brackets because he is running a 26.


Taylor
e10pvmt   +1y
do you make the whole relocating bracket similar to ones that are made for the 07 and up? He is running ART arms and we will see this weekend if we have any issues. What is the cost on a set of arms raw and powdercoated with jeebus uppers and ball joint lowers? Maybe even a price just on the relocating bracket. Thanks
jeebus @ mmw   +1y
I do not currently produce the whole replacment bracket, its not something i see myself making, i personally do not like that kind of setup, very much, i only made the last one at the customers repeated request...... I would make something like that if you needed it, but really replacing them with an interlocking raised UCA bracket like the ones i make for ram truck is a better option, and ends up looking much nicer.

The arms raw are 899$ with powder coat 975$

They both come fully equiped with jeebus joints, all bushings and hardware to install.


Taylor
jeebus @ mmw   +1y
I took a picture of these for some reason tonight.... maybe because im on a 72 hour work binge, and im lacking on sleep, but I was not sure if i had ever posted a picture of the actual tapered shafts that go into the jeebus joints i produce.

Now, each shaft is CNC turned from stress proofed CR steel. then sand blasted and polished, and given a black oxide treatment, in house.

They end up looking cool!



Taylor

post photo