jeebus @ mmw
+1y
these are a set of arms im working on for a customer, that would like to remain nameless for the moment.
They feature all of my new options for the Jeebus Joint arms i produce. The billet aluminum top cap, and the new Jeebus Joint boot for the bottom side. I also will now be having delrin bushings as an option for any arm i produce.
The top aluminum cap will help change the look of the arm significantly, as well as keep debris from accumulating inside the cup. Now, as allways i use 100% sealed and teflon lined bearings on everything, so no dirt can possibly get into them, but, none the less i had the request for this a few times now, and these were a great chance to show them off. The billet cap can be machined with any pattern or logo you want into it at no extra change to the cap upgrade.
Im also going to start offering boots for the bottom sides of the jeebus joint control arms. Again, this is just a nice cosmetic thing that will keep dirt and grease from accumulating on the bearing, they are by no means necessary, but again, i have had requests for them, so i dug into it and im having these jeebus joint boots produced.
The delrin bushings are going to be an option as well with any control arm. I didnt realize how many people prefered the delril to regular poly, so it was a no brainer to give it as an option. Its funny because about 5 years ago, i was using delrin for all the bushings i made for my personal stuff and everyone said i was dumb for doing it, but times have changed, so im offering it again as well.
And as allways with all my jeebus joint parts, they are all CNC produced, to fit your exact vehicle, and directly bolting into the spindle, with no mods necessary!